Contents | < Browse | Browse >
Amiga Wacom Driver available for anonymous FTP
Wacom Digitizertablet driver for the Commodore Amiga.
With this program you can use wireless tablets manufactured by Wacom
with the Amiga.
The tablet is connected to the serial port of your Amiga (Multi-IO
boards are also supported.) The driver supports tablets of the SD and
the new UD-Series.
Both the pressure sensitive and the non-pressure sensitive mode are
supported. (When in pressure mode the tablet transmitts the pressure
which is applied to the tablet by the pen to the driver instead of
The driver enables you to control the Amiga mouse pointer with your
tablet. Appropriate buttons on the tablet's input devices are mapped
to the normal mousebuttons. Therefore the driver can be used with
almost any program.
Also, a software interface is implemented which enables you to map
unused buttons in your own applications and/or to use the pressure
and coordinates in your own applications. Some sample source in C is
included to demonstrate the usage of the interface.
Driver settings are made using an intuitive graphics user interface
(GUI). Also a German catalog file is supplied which you can use with
at least Workbench 2.1.
German and English documentation included.
Initial release. (=> All features are new ;-) )
* At least Kickstart and Workbench 2.04.
On 2.1 or 3.x you can use German localization.
* Wacom tablet of the SD or UD-Series.
Available on servers in the aminet. e.g.:
Scandinavia ftp.luth.se 184.108.40.206
Germany ftp.uni-kl.de 220.127.116.11
Germany ftp.uni-erlangen.de 18.104.22.168
USA ftp.wustl.edu 22.214.171.124
... ... ...
Wacom.lzh ----- 109523 Bytes
Wacom.reamde -- 605 Bytes
The program is shareware. Requested fee: US$20 (or 25DM)
May be distributed freely as long as all files remain complete
and unmodified. May appear on PD-disks which are cheaper than US$5
(PD-CDROMs may be more expensive). Also refer to the program's